.png)
Product Overview
-
The BR100 bioreactor is a single-wall, flat-bottom benchtop stirred tank constructed of borosilicate glass 3.3. The system is equipped with built-in fixed-speed peristaltic pumps for stable and reliable liquid handling, while the 10.1-inch touchscreen provides an intuitive interface for real-time monitoring and process control.
-
With vessel volumes ranging from 1 L to 15 L, the BR100 series is available in dedicated configurations for cell culture (BR100-C1/C2) and microbial fermentation (BR100-M1/M2). It supports both single-vessel and dual-vessel control configurations. Combining ease of operation, reliable performance, and cost-effectiveness, the BR100 is an ideal solution for teaching, process development, and small-scale production.
1 - 15 L
10"
Single or Twin
24
Vessel Volume
Touchscreen
Vessel Operation
Recipes
Key Features
Sanitary Vessel Design
Premium borosilicate glass 3.3 vessel with electropolished SUS316L stainless steel components and EPDM/silicone seals — delivering reliable airtightness and easy quick assembly
Easy Gas Control
Equipped with rotameters and solenoid valves for stable gas regulation, with customizable gas lines to meet diverse cultivation requirements — an ideal entry-level solution for cost-sensitive applications
Flexible Parallel Expansion
A single controller supports either an independent single vessel or twin parallel operation, enabling recipe sharing, trend comparison, and synchronized parameter setting to improve experimental efficiency
Stable Fluid Handling
Front-mounted fixed-speed peristaltic pumps provide consistent delivery of acid, base, antifoam, and feed solutions for reliable process control
Intelligent Control Platform
Siemens S7 200 PLC controller with an easy-to-use 10.1-inch touchscreen interface, supporting manual, automatic, and PID control modes
Adjustable Impeller System
Multiple impeller options with adjustable height, and removable design for quick replacement and reduced maintenance
Smart layout by volume: All critical components are integrated into the vessel lid, enabling seamless configuration of accessories and sensors for flexible functional expansion.
Agitation Port | Maintenance-free, low-noise servo motor. Customized agitation mode, speed range, and impeller options available. |
Gas Inlet Port | Supports standard four gas inputs (Air, CO₂, N₂, O₂). Customized gas configurations available. |
Exhaust Port | Exhaust condenser minimizes moisture loss and reduces exhaust gas temperature. |
Temp. Sensor | German JUMO Pt100 RTD, 0–150°C range, ±0.2°C accuracy. Controlled by electric heating base and internal water circulation system. |
pH Sensor | Hamilton gel-filled pH electrode, pH 2.0–12.0 range, ±0.05 accuracy. Cascade control with acid/base pumps and CO₂ flow, etc. |
DO Sensor | Hamilton polarographic DO electrode, 0–150% range, ±3% accuracy. Cascade control with agitation, feeding, and gas flows. |
Foam Sensor | Standard foam detection electrode with automatic antifoam dosing via peristaltic pump. |
Baffle Port with Cooling Coil | Supports tap water or chilled water circulation. Optional chiller integration available. |
Feed Port | Peristaltic pump feeding, or with needle addition. |
Inoculation | Standard flame inoculation port. |
Sampling | Aseptic sampling device: sterile syringe, Luer connector, one-way valve, T-joint, and needle filter. |
Built on a Siemens S7 200 Smart PLC controller, the system supports PID control, cascade strategies, recipe management, and over-limit alarms. Upgradable electronic signatures and audit trails ensure compliance with 21 CFR Part 11 and GMP standards.
