
Industrial Chromatography System
Dieses präparative Flash-Chromatographiesystem ist Ihre ultimative Lösung im industriellen Maßstab für die Trennung und Reinigung von Hanf und Cannabis.
Das industrielle Chromatographiesystem verfügt über eine viel höhere Verarbeitungskapazität als die Systeme im Labor- und Pilotmaßstab, ist sehr leistungsstark und die perfekte Wahl für die Unterstützung kommerzieller Trennungen und Reinigungen.
Industrielle Chromatographie
IFPC-400 / IFPC-800 Models
Sampling per time: 0-5 kgs / 10-20 kgs
Sampling per day: 1-10 kgs / 20 - 40 kgs
Chromatography column A: Ø400×1000mm / Ø800×1000mm
Chromatography column B/C: Ø400×2000mm / Ø800×1000mm
Flow rate: ≥250 L/h / ≥400 L/h
Extra: each system includes a solvent mixing tank, primary column A, secondary column B, spare column C for alternate use, and some buffer tanks.

Entwurf für
Our industrial chromatography system is created to boost and purify separations for the below materials due to its advanced separation and purification of different particles with varied particle microns.
.png)
.png)
.png)
.png)

Smooth workflow
-
The standard working process is well designed and streamlined by our engineer to promise a smooth workflow.
Large capacity
-
Unlike the lab-scale flash chromatography, this one is much larger and also has a higher processing capacity of up to 40 kgs per day.
Space adjustability
-
We can adjust to any room or factory space by adjusting our design in order to make this system fit.
Safe & easy operations
-
This system has been tested countless times for safe operations and easy operations.
Standardmodelle
Von diesen beiden Standard-Chromatographiesystemen erfüllen IFPC-400 und IFPC-800 Ihre Anforderungen. Beide Systeme umfassen einen Lösungsmittelmischtank, drei Säulen (ABC) und einige Puffertanks. Darüber hinaus ist einige notwendige Ausrüstung verfügbar, wie ein Fallfilmverdampfer und ein Rotationsverdampfer, um das Sammeln der Lösungsmittel der mobilen Phase zu erleichtern.
Anpassungsdesign
Wir verfügen über ein professionelles Ingenieurteam mit hervorragenden Fähigkeiten im Grafikdesign, um die individuellen Ideen unserer Kunden umzusetzen oder ihnen nach Erhalt ihrer Anforderungen direkt unser eigenes Design vorzustellen.


Handling pressure goes up to 5000 PSI

Der Partikeldurchmesser reicht bis zu 5 - 15 Mikrometer

Unbehandelte Kieselsäure und Umkehrphasensäule
Ausstattungspaket
![]() | ![]() | ![]() |
---|---|---|
![]() | ![]() | ![]() |
![]() |
Ein Blick auf unsere hervorragenden Designs






The Workflow of Industrial Chromatography

1. Adding extracts
Add the “mother liquid”/ extracts that you get from the crystallization process into the eluent used as the mobile phase. Since there are many compounds in cannabinoids and one solvent may only separate one component, the mobile phase usually refers to a mixture of different solvents in proportion. Those solvents can efficiently separate the desired components (CBG, CBN, THC, CBD, etc.) during the flash chromatography process.
2. The separation starts
The flash column is with a stationary phase (e.g., silica gel). The mixture of solvents and extracts can be applied to the top of the column. And a metering pump will be used to push the mobile phase along with the extracts through the stationary phase - the separation starts.
3. Cannabinoid acquisition
After the separation process, there is still a certain amount of solvent residue in the separated cannabinoids. It is important to use an evaporation process such as falling film evaporators and rotary evaporators to remove the final solvent. When this is done, you will get fully separated cannabinoids.